Panasonic DP-8025 - Manual (Page 192)

Customizing Your Machine
192
Fax Parameter Table
043 Password-Transmit *Off Setting a 4-digit XMT-Password, and selecting whether the machine
performs, and checks the XMT-Password of the receiving station when
transmitting. (See page 77)
On
044 Password-Receive *Off Setting a 4-digit RCV-Password, and selecting whether the machine
performs, and checks the RCV-Password of the transmitting station
when receiving. (See page 79)
On
046 Select Receive *Invalid Selecting whether the machine performs selective reception.
(See page 91)
Valid
052 Diagnostic Password (----) Setting the password for Remote Diagnostic Mode. Please ask your
Panasonic Authorized Dealer for details.
053 Sub Address Password (----) Setting a 20-digit password for secured sub-address communication.
054 Fax Forward *Invalid Selecting whether the machine performs Fax Forwarding to the
specified destination.
Valid
056 Cover Sheet
(HOME)
*Off Setting the home position of the Cover Sheet parameter in the Select
Mode. (See page 73)
On
077 Department Code *Invalid Selecting whether the machine performs the Department Code
operation. (See page 93)
Valid
078 Rotation XMT Invalid Selecting whether the machine performs rotation transmission.
*Valid
082 Quick Memory XMT Invalid Selecting whether the machine performs Quick Memory Transmission.
Invalid :Stores all documents into memory first before dialing the
telephone number.
Valid :Starts dialing the telephone number immediately after storing
the first page.
*Valid
086 Ringer Volume Off Setting the home position of the ringer volume when your machine
receives a call.
* Soft
Loud
089 List Output Tray *Upper Selecting the Output Tray home position for List printout.
Upper :The List printout exits to the Upper Output Tray.
Bottom :The List printout exits to the Bottom Output Tray.
Bottom
Inner 1
Inner 2
Outer
095 Duplex Print *Invalid Selecting whether the machine performs duplex print when Letter/A4
originals are received.
Valid
* = Factory default setting
No. Parameter Setting Comments