Panasonic DVCPRO50 AJ-D960EG - Manual (Page 28)

28 (E)
Playback
1
Insert the cassette tape, and place the unit in the stop mode.
2
Press the PLAY button.
Regular playback is now commenced.
3
Adjust the audio playback level.
Pull out the audio level controls and turn them clockwise or counterclockwise to adjust
the levels. Normally, they are kept in the pushed-in state (unity value).
4
To end playback, press the STOP button.
The VTR now goes into the stop mode.
Check that the SERVO lamp is lit during playback. If it flashes or if it is off, the images played
back will be disturbed.