Philips Video Camera - Manual (Page 25)

24 25
MODE : INTERNAL / EXTERNAL. Adjusts phase of picture with other cameras in EXTERNAL mode.
PHASE : 0~255
EXIT (ESC TO EXIT)
• NIGHT SHOT MENU (not at EDC-142E1 and EDC-142E)
The NIGHT SHOT option removes the IR cutoff filter of the camera and makes the camera sensitive to near infrared. This will set the BLACK & WHITE option to
ON automatically.
LINE LOCK SETUP
MODE : INTERNAL
PHASE : 125
EXIT (ESC TO EXIT)
NIGHT SHOT SETUP
MODE : MANUAL
LOCAL CONTROL : OFF
EXIT (ESC TO EXIT)
AE SETUP
MODE : FULL AUTO
SLOW SHUTTER : AUTO
IRIS : F1.6
GAIN : 2DB
BRIGHT : 30
SHUTTER : AUTO
WDR MODE : ON
EXIT (ESC TO EXIT)
EDC-142E1
EDC-142E2
MODE : FULL AUTO / SHUTTER PRIO / IRIS PRIO / AGC / MANUAL
SLOW SHUTTER : AUTO / OFF, ON (MANUAL, SHUTTER PRIO Mode)
IRIS : CLOSE / F1,6 / F2,0 / F2,8 / F4,0 / F5,6 / F8,0 / F11 / F16 / F22 / F32
GAIN : OFF, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20dB
BRIGHT : User can adjust brightness level (0 – +90). Level 30 is default.
SHUTTER : 1/1, 1/2, 1/3, 1/6, 1/10, 1/30, 1/60, 1/100, 1/125, 1/250, 1/500, 1/1.000, 1/2.000, 1/5.000, 1/10.000
(1/1, 1/2, 1/3, 1/6, 1/12, 1/25, 1/50, 1/100, 1/120, 1/250, 1/500, 1/1.000, 1/2.000, 1/4.000, 1/10.000)
WDR MODE : Wide Dynamic Range Technology uses two shutter speeds in alternative video fields - high and normal - every 60th (or 50th) of
a second and combines two fields into one progressive scan frame. It allows every detail to be captured accurately even if one
portion of an image is brillantly bright while other portions are dark.
EXIT (ESC TO EXIT)
NOTE: Values in ( ) are for PAL Camera. The value is different according to the model.
• LINE LOCK CONTROL
MODE: MANUAL / AUTO / GLOBAL
AUTO: Camera goes in to B&W mode at low light.
GLOBAL: Controlled by the keyboard
The operator can enable NIGHT SHOT for all dome cameras at the same time. If the NIGHT SHOT mode is set to GLOBAL,
„ 9 9 9„ + Enter/Glbl will turn Off the NIGHT SHOT mode „8 8 8” + Enter/Glbl will turn On the NIGHT SHOT mode.
MANUAL: Controlled by the local setting value
LOCAL CONTROL: ON/OFF will enable and disable Night Shot mode of an individual camera.
EXIT (ESC TO EXIT)