Philips Video Camera - Manual (Page 15)

14 15
DOME MENU
AUTO SCAN
PRESET
TOUR
PATTERN
ALARM
AREA TITLE
PRIVACY ZONE
CAMERA
DOME SETUP
EXIT(ESC TO EXIT)
3. Program and Operation
3.1 Selecting Dome Camera
Before you program or operate a dome camera, you must select the dome camera by pressing the dome camera No. + CAM successively.
Example: Pressing 1, 0 and CAM key sequentially will select dome camera 10. The selected dome camera ID will be displayed on the LCD monitor of the
keyboard controller.
3.2 Accessing On-Screen Menu Utility
You can call up the On-screen menu utility on your monitor by pressing MENU key on the keyboard controller, the following On-screen menu utility will appear:
3.3 How to control On-Screen Menu Utility
Action Function
MENU Call on On-screen menu utility
Joystick left or right
Go into the sub-menu items.
Execute the command (exit)
Change value.
Navigate through the menu items.
Joystick up or down Navigate through the menu items.
Joystick down Finish editing title. Same effect as Enter key
Zoom handle twist
Change value.
Enter editing title mode at Preset menu.
CTRL + Joystick PTZ control of the selected camera
ESC Escape (EXIT)