Digital signal processor – Pioneer Super Tuner III D DVH-P5850MP User Manual

Page 73

Black plate (73,1)

4 Press n and then press r or q to

select the center frequency of selected

band.

Each press of r or q selects the frequency

in the following order:

40Hz50Hz63Hz80Hz100Hz125Hz

160Hz200Hz250Hz315Hz400Hz

500Hz630Hz800Hz1kHz1.2kHz

1.6kHz2kHz2.5kHz3.1kHz4kHz

5kHz6.3kHz8kHz10kHz12kHz

5 Press n and then press r or q to

adjust the equalizer level.

Each press of r or q increases or de-

creases the equalizer level. +6 6 is dis-

played as the level is increased or decreased.

6 Press n and then press r or q to

select the desired Q factor.

Each press r or q switches between the

following Q factor:

WID (wide)NAR (narrow)

# You can adjust parameters for each band of

the other speakers in the same way.

7 Press BAND to return to the playback

display.

Note

You can select a center frequency for each band.

You can change the center frequency in 1/3-oc-

tave steps, but you cannot select frequencies that

have intervals shorter than 1 octave among the

center frequencies of the three bands.

Digital Signal Processor

Section

Digital

Signal

Proce

ssor