Tuner listening to the radio 18, Listening to the radio, Tuner – Pioneer Super Tuner III D DVH-P5850MP User Manual

Page 18

Black plate (18,1)

Listening to the radio

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

1 Band indicator

Shows which band the radio is tuned to, AM

or FM.

2 Signal level indicator

Shows the radio wave strength.

3 Frequency indicator

Shows to which frequency the tuner is

tuned.

4 Stereo (5) indicator

Shows when the frequency selected is

being broadcast in stereo.

5 Preset number indicator

Shows which preset has been selected.

1 Press SOURCE to select the tuner.

Press SOURCE until you see TUNER dis-

played.

2 Press BAND to select aband.

Press BAND until the desired band is dis-

played, F1, F2, F3 for FM or AM.

3 To perform manual tuning, press m or

n with quick presses.

The frequencies move up or down step by

step.

4 To perform seek tuning, press and hold

m or n for about one second and re-

lease.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by pressing either
m or n with a quick press.
# If you press and hold m or n you can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.

Note

When the frequency selected is being broadcast
in stereo the stereo (5) indicator will light.

Tuner

Section