Primera Technology Cyclone C-1000 User Manual
Page 8
4 Getting Started
C. IDENTIFYING THE PARTS
Front Panel
The illustration below shows the printers front panel:
The front panel includes:
3 LED indicators (READY, MEDIA and RIBBON)
3 buttons (FEED, PAUSE and CANCEL)
LED Indicators
There are three LED indicators on the front panel labeled
READY, MEDIA and RIBBON. These indicators display
the operational status of the printer.
The READY indicator will remain lit except
during the following conditions
- The printer is in PAUSE state.
- A fault condition has occurred.
The MEDIA indicator will remain lit except
when the media (labels or ribbon) has run out.
ON lit when using thermal transfer mode
with ribbon installed.
OFF not lit when in direct thermal mode (no
ribbon installed).
Blinking ribbon has run out.
RIBBON
MEDIA
READY
CANCEL/
PAUSE/
RESET
CALIBR.
FEED/
RIBBON
MEDIA
READY
CONFIG.
510172_r1.qxd 3/21/2001 6:25 PM Page 4