Primera Technology Cyclone C-1000 - Manual (Page 32)

28 Command Language Quick Reference
(Table continued from previous page)
Command Description Remarks
Oxxxx Set start of print
position
P Enable data dump
Q Clear memory
(fonts & graphics)
r Select reflective sensor
Sn Set feed rate for motor n: ‘A’, ‘B’ or ‘C’
T Print test pattern
Vn Set cutter or dispenser n: ‘1’ - enable cutter,
configuration ‘4’ - enable dispenser
v Printer version
information
Wn Graphics/fonts/labels n: ‘G’, ‘F’ or ‘L’.
and memory status through RS232
details
x Release file from
printer memory
Formatting Commands
Command Description
:xxxx Set cut amount
An Set print mode
n : ‘1’- exclusive, ‘2’ - transparent
Cxxxx Set horizontal offset
cxx Set cut amount
Dwh Set pixel width and height
E Form feed and return to system level
command mode
G Store previous data to global register
Sn Retrieve from global register. n : global
register ID
Hxx Set heating value, xx=01~20
M Toggle the mirror mode
m Set measurement in metric
n Set measurement in inches
Pn Set print speed. n=’A’, ‘B’, or ‘C’ **
Qxxxx Set copy count
510172_r1.qxd 3/21/2001 6:25 PM Page 28