Primera Technology Cyclone C-1000 - Manual (Page 31)

Command Language Quick Reference 27
Note: Control codes for the printer commands.
Symbol Code (hexadecimal)
XON 11H
XOFF 13H
STX 02H
SOH 01H
ESC 1BH
LF 0AH
CR 0DH
Note: There is no space code in each command.
System Level Commands
Command Description Remarks
a Enable page/job
echo characters
cxxxx Set continuous
paper length and
disable edge sensor
Dxxxxxxx Memory dump** xxxxxxx : memory
address in HEX value
Exxxx Set copy count for
stored label
e Enable edge sensor
F Feed a page
fxxx Back feed from top
position
G Print stored label
I Download graphics either PCX, BMP, PCX
or HEX format
J Set pause for each
label
j Cancel pause
KQ System configuration
details
L Enter label formatting
state
Mxxxx Set maximum label
length
m Set measurement in
metric
n Set measurement in
inches
510172_r1.qxd 3/21/2001 6:25 PM Page 27