Primera Technology Cyclone C-1000 - Manual (Page 30)

26Command Language Quick Reference
(Table continued from previous page)
Command Description Parameter Factory default
KI<m Set symbol set m: ‘0’ - USASCII, 0 for USASCII
for ASD smooth ‘1’ - United
font set Kingdom,
‘2’ - Spanish,
‘3’ - Swedish,
‘4’ - French,
‘5’ - German,
‘6’ - Italian,
‘7’ - Danish/
Norwegian.
Interaction Commands
These commands only apply to the serial port and allow the
host to understand the status and configuration of the printer.
Command Description Response Contents
# Reset Y T
A Send a readable Y <8 bytes, Y/N>
status string byte 1 : Y - printer busy
byte 2 : Y - paper out
byte 3 : Y - ribbon out
byte 4 : N (always)
byte 5 : Y - printing
byte 6 : Y - printer
paused
byte 7 : Y - label
presented
byte 8 : N (always)
B Toggle pause N
condition
E Send the Y e. g.
number of 0000
labels to be no label left to be
printed printed
F Send status byte Y n
same as A,
except bit 1 ~ 8 are
corresponding to byte
1 ~ 8 of A.
510172_r1.qxd 3/21/2001 6:25 PM Page 26