Paradyne M/HDSL Standalone Termination Unit Hotwiret 7986 - Manual (Page 4)

4 7986-A2-GZ40-00 March 1999
Entering Identity Information
After accessing your unit for the first time, use the Change Identity screen to
determine SNMP administrative system information that will be displayed on the
Identity screen of the Status branch. To access the Identity screen, follow this
menu selection sequence:
Main Menu
→
Control
→
Change Identity
Network Configuration
The following illustration shows a network application using a 2-port Hotwire 8786
or 8784 M/HDSL Termination Unit for access concentration in a central office
(CO). A frame relay switch and a router are connected, through the termination
unit, to partner units supporting a host or router, and frame relay encapsulated or
unframed data.
Frame
Relay
Switch
Router
E1 Host
(Frame Relay
Encapsulated
Data)
98-16151
Router
(Frame Relay
Encapsulated
Data)
G.703
Router
2.048 Mb
over
SDSL
8786 or 8784
Termination Unit
in 8600 DSLAM
CO Site
7986
7986
7985
Customer
Premises (CP)
7985
Customer
Premises
NTU
CO Site
LTU
7986 (G.703)
V.35
EIA-530A
V.35
G.703
7986 7986 (G.703)
G.703