Cassette tape player basics, Tape eject, Metal tape mode – Panasonic CQ-4300U User Manual

Page 10: Dolby noise reduction, Continued)

Cassette Tape Player Basics

(continued)

Tape Eject

Press [

] to eject the tape, and the previous mode of operation will

be resumed.

Notes:

Always remove the cassette tape from the unit when the cassette
tape player is not being used.
If power is switched off before [

] is pressed, the cassette will not

be ejected. Switch on the power again and press [

] to eject the

cassette.

Metal Tape Mode

Press [1 MTL] when playing metal or chromium dioxide (CrO

)

position tapes.

Press [1 MTL] again to cancel.

Note: Playing non-metal position tapes in MTL mode causes high
frequency imbalance, which affects tone quality.

Dolby Noise Reduction

Press [2 NR] to set the Dolby B NR mode.

Press [2 NR] again to cancel.

Note: Set the Dolby B NR mode when playing back a tape recorded
with Dolby B Noise Reduction.

BASS/FAD
BAL/FADER