Panasonic DMR-ES40V - Manual (Page 18)

Getting started
18
VQT0R73
If other Panasonic products are placed close together, change the
remote control code on the main unit and on the remote control (the
two must match). When changing the remote control code, make
sure the two codes are same.
Under normal circumstances use the factory set code “1”.
[1]
While stopped
Press [FUNCTIONS].
[2] Select “Other
Functions” with [
3, 4]
and press [ENTER].
[3] Select “SETUP” with
[
3, 4] and press
[ENTER].
[4] Select “Setup” with [ 3, 4] and press [2, 1].
[5] Select “Remote Control Code” with [ 3, 4] and
press [ENTER].
[6] Use [ 3, 4] to select the code (1, 2 or 3) and
press [ENTER].
≥The code on the unit has been set.
[7] While pressing [ENTER], press and hold the
numbered button ([1], [2] or [3]) corresponding
to the code you selected in step 6 for about 2
seconds.
≥The code on the remote control has been set.
[8] Press [ENTER].
∫ When the following indicator appears on the unit’s
display
The unit’s remote control code
Change the code on the remote control to match the main unit’s code
(
l step 7).
∫ To return to the previous screen
Press [RETURN].
∫To exit the screen
Press [RETURN] several times.
To turn the TV on/off, change the TV input mode, select the TV
channel and change the TV volume by means of this remote control,
set the remote control as follows.
Point the remote control at the TV
While pressing [ Í POWER TV], enter the code
using the numbered buttons.
e.g., 01: press [0] > [1].
Manufacturer and Code No.
≥Test by turning on the TV and changing channels. Repeat the
procedure until you find the code that allows correct operation.
≥If your TV brand is not listed or if the code listed for your TV does
not allow control of your TV, this remote control is not compatible
with your TV.
STEP 4 Set up to match your TV and remote control
∫ When other Panasonic products respond
to this remote control
PLAY
S
SCHEDULE
TIME SLIP
FUNCTIONS DIRECT NAVIGATOR
TOP MENU
RETURN
STATUS DISPLAY
SUB MENU
JET REW
FUNCTIONS
RETURN
SKIP/INDEX
SLOW/
SEARCH REW FF
PLAY
OPERATION
SELECT
POWER
CM SKIP CANCEL/RESET
VOLUME CH INPUT SELECT
AUDIO
TV
TV/VIDEO
VHS DVD
TRACKING/V-LOCK
DVD/VHS POWER
VCR Plus+
POWER
CANCEL
DVD ERASE REC REC MODE ADD/DLT
DUBBING
VHS DVD
CREATE
CHAPTER VCR/TV VCR/TV
3, 4, 2, 1
ENTER
TV, Í
FUNCTIONS
RETURN
CH, W, X
VCR/TV
Numbered
buttons
FUNCTIONS DVD
DVD-RAM Cartridge Protection Off
Disc Protection Off
DIRECT NAVIGATOR
SCHEDULE
VCR Plus+ 1 2 3
Other Functions Return
PLAYLISTS
FLEXIBLE RECORDING
DV AUTO RECORDING
SETUP
DISC MANAGEMENT
ENTER
Playback
Schedule
∫ TV operation
Panasonic
National
QUASAR
01, 02
PHILIPS (RC-5) 03
RCA 05
SAMSUNG 14, 18, 19
FISHER 10 SANYO 10
GE 05 SHARP 06, 07
GOLDSTAR 15, 16, 17 SONY 08
HITACHI 12 SYLVANIA 03
JVC 11 THOMSON 05
LG 15, 16, 17 TOSHIBA 09
MAGNAVOX 03 ZENITH 04
MITSUBISHI 13
ES40VP&PC.book 18 ページ ２００５年９月６日 火曜日 午前１０時２３分