Philips DVDR3300H - Manual (Page 18)

18
Step 1: Basic Recorder Connections
(continued)
TIPS: For option 2 connection, you have to set the appropriate Digital Audio Output setting, see
page 58. Otherwise, no sound or a loud noise may occur.
Connecting the audio cables
This connection enables you to listen to
the playback from this recorder.
However, this connection is not required
if this recorder is connected to the TV
using the supplied scart cable.
Option 1: Using the analogue audio
sockets
You can connect the recorder to a two
channel stereo system (mini system, TV)
or receiver in order to enjoy the stereo
sound system.
Use an audio cable (red/white - not
supplied) to connect the AUDIO OUT
L/R sockets to the audio input sockets of
the connected device.
Option 2: Using the digital audio
socket (Optical or Coaxial)
You can connect the recorder to an AV
amplifi er/receiver in order to enjoy
multichannel surround sound.
Use a coaxial cable (not supplied) to
connect the COAXIAL-DIGITAL
AUDIO OUT socket to the digital
coaxial input socket (or labelled as
COAXIAL IN or DIGITAL IN) of the
connected device.
– an A/V receiver or amplifi er with a
digital multi-channel sound decoder.
– a receiver with two-channel digital
stereo (PCM).
OR
Use an optical fi bre-optic cable (not
supplied) to connect the OPTICAL-
DIGITAL AUDIO OUT socket to the
optical input socket of the connected device.
Make sure that both plugs are fully
inserted (until a click is heard).
Remove the dust caps from the optical
socket. Keep the caps in a safe place.
OR OR
Option 2
Option 1
AV amplifi er/receiver
dvdr3300h_uk_eng_17233d.indd 18 dvdr3300h_uk_eng_17233d.indd 18 2005-10-19 10:41:22 AM 2005-10-19 10:41:22 AM