Philips FW-P900 - Manual (Page 18)

18
English
3139 115 20411
Volume Control
Adjust VOLUME to increase (turn clockwise or
VOLUME +) or decrease (turn counter-
clockwise or VOLUME -) the sound level.
To listen through the headphones
● Connect the headphones plug to the n socket
at the front of the system.
➜ The speakers will be muted.
To switch off the volume temporarily
● Press MUTE on the remote control.
➜ Playback will be continued without sound and
"
MUTE" will be displayed.
● To switch on the volume, press MUTE again or
increase the VOLUME level.
Interactive Sound Control
For optimal sound listening, you are only
able to select one of the following
interactive sound controls at a time :
PERSONAL, DSC, VEC or BASS/TREBLE.
Personal Sound
1 Press PERSONAL.
2 Adjust the JOG
CONTROL (or press
PER. on the remote
control repeatedly) to
select the desired
Personal setting.
➜ The selected Personal setting number will
appear on the display.
➜ If no name has been stored previously,
“
PERSONAL X" will be displayed. "X" is the
setting number.
Personal Setting
You can use the JOG CONTROL to adjust the
Personal setting to your desired level. Up to 6
Personal settings can be stored.
1 Press and hold PERSONAL on the system
until "
SELECT PRESET NUMBER" is displayed.
2 Adjust the JOG CONTROL to select the
desired Personal setting number and press á
on the system to confirm the selection.
➜ "ADAPT LOW FREQ LEVEL" will be
displayed.
3 Adjust the JOG CONTROL to select the
desired Spectrum Analyzer band level for low
frequency.
➜ The level will increase or decrease
between+3 and -3.
4 Press á to confirm the selection.
➜ "ADAPT MID FREQ LEVEL" will be
displayed and the next followed by "
ADAPT
HIGH FREQ LEVEL".
● Repeat steps 3–4 to select the desired mid and
high frequencies Spectrum Analyzer band levels.
5 You can choose to edit the name for the
personal setting.
➜ The first character of the setting name will be
flashing.
6 Adjust the JOG CONTROL to select the
desired letter, number or symbol.
➜ "A to Z", "0 to 9" or "*, -, +, \, /, _".
7 Press á to confirm the selection.
➜ The next character for editing will be flashing.
● Repeat steps 6–7 to store up to 10 characters.
8 To store the setting, press PERSONAL on the
system again.
To change any previous setting before
storing
● Press à on the system to retrace the steps in
the reverse order and make the changes
accordingly.
To exit without storing the setting
● Press Çon the system.
Notes:
– During personal setting, if no button is pressed
within 90 seconds, the system will exit the Personal
setting mode automatically.
– When making a Personal setting, it is not
possible to adjust the Bass/Treble level, "
USE
JOG" will be displayed.
Basic Functions
pg 001-033/P900/37-Eng 12/8/00, 1:53 PM 18