Paradyne T1 Access Mux 916x - Manual (Page 5)

5
Voice Ports
Configuration Option Settings Default in [Bold]
E&M Voice
Slot ss 9x62: 02
9x65: 02, 03, 04, 05
Port p 1, 2, 3, 4, 5, 6, 7, 8
Port Status Enable, [Disable]
Operating Mode [E&M], Transmit Only
Rx Gain (dB) –17.0, –16.5, –16.0, –15.5, –15.0, ..., [0.0],
..., +6.5, +7.0, +7.5
Tx Attenuation (dB) –17.0, –16.5, –16.0, –15.5, –15.0, ..., [0.0],
..., +6.5, +7.0, +7.5
Trunk Cond in CGA [Busy], Idle
FXO Voice
Slot ss 9x62: 02
9x65: 02, 03, 04, 05
Port p 1, 2, 3, 4, 5, 6, 7, 8
Port Status Enable, [Disable]
Operating Mode [FXO], FXODN, FXODN/WINK, DPT
Signaling Type [Loop-Start], Loop-Start/Fwd-Disc, Ground-Start
Terminating Impedance (ohms) [600], 900
Wink Delay (10 ms) 1 – 99 [15]
Wink Duration (10 ms) 1 – 99 [20]
Rx Gain (dB) –10.00, –9.5, –9.0, –8.5, ..., [0.0], +0.5,
+1.0, +1.5, +2.0
Tx Attenuation (dB) –10.00, –9.5, –9.0, –8.5, ..., [0.0], ..., +4.0,
+4.5, +5.0
Trunk Cond in CGA [Busy], Idle