Paradyne T1 Access Mux 916x - Manual (Page 13)

13
Management and Communications (continued)
SNMP Traps
SNMP Traps Enable, [Disable]
Number of Trap Managers 1 – 6 [1]
NMS n IP Address 1 [000.000.000.000] – 223.255.255.255, Clear
Destination [Default], COM, FDL1, FDL2, DDL, EDL ss-p
General Traps Disable, Warm, AuthFail, [Both]
Enterprise Specific Traps Enable, [Disable]
Link Traps Disable, Up, Down, [Both]
Link Traps Interfaces 2 Network, DSX-1, T1s, Ports, [All]
1 The first byte cannot be set to 0 nor 127. However, the null address of
0.0.0.0 is valid after performing a Clear.
2 DSX-1 and T1s only shown when DSX-1 interface is enabled.