With component video connectors, 3dvd / stb 2, Also select – Philips 42PF9641D/10 User Manual
Page 49: Jacks and to the, Jack of, Ext3, Digital audio in, Audio in l/r
Pr
Pb
Y
DIGITAL
AUDIO
AUDIO
HDTV & Progressive
DISPLAY SYNCHRONIZED
480p, 576p, 720p, 1080i
IN
IN
L
R
EXT3
AUDIO
OUT
AUDIO
OUT
L
R
DIGITAL
AUDIO
OUT
1
EXT3 :
YPbPr
EXT3 :
AUDIO IN
R / L
3
DVD / STB
2
DIGITAL
AUDIO
IN
Connect a DVD player, a satellite receiver or HD receiver
EN
49
With Component Video Connectors
1. Connect the three separate component video
cables 1 to the YPbPr jacks on the DVD player
and to the Y, Pb and Pr jacks of
EXT3
on the
TV.
2. Connect the audio cable 2 to the digital out of
the equipment and to the
DIGITAL AUDIO IN
connector of the TV.
3. Select the equipment you have connected in the
Installation menu, Select your connections, p. 32
and link it to
EXT3
. Also select
DIGITAL
AUDIO IN
in the same Connections menu.
4. In case of a DVD player with analogue audio,
connect the audio cable to the DVD’s audio
L
and
R
jacks and to the
AUDIO IN L/R
jack of
EXT3
3.
5. In case of a HD receiver and/or a satellite
receiver also connect the cable TV cable and/or
the satellite antenna cable 4 and the aerial
cable 5.
Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
Notes:
- cables are often colour coded. Connect red to
red, white to white, etc..;
- the labels for the component video sockets may
differ depending on the DVD player connected.
Although the abbreviations may vary, the letters
B and R stand for the blue and red component
signals, respectively, and Y indicates the
luminance signal. Refer to the DVD player’s
instructions for use for definitions and
connection details;
- to get an optimal viewing, it is advised to switch
your equipment to the highest possible
supported display modes.
Warning: in case you notice scrolling images,
wrong colours or no colour, no picture, or even
combinations of these on your screen, verify if
the connections are done in the correct way and
if the resolution and the signal standard of the
connected equipment are set in the right way.
See the handbook for your equipment.
Pr
Pb
Y
DIGITAL
AUDIO
AUDIO
HDTV & Progressive
DISPLAY SYNCHRONIZED
480p, 576p, 720p, 1080i
IN
IN
L
R
EXT3
AUDIO
OUT
AUDIO
OUT
L
R
DIGITAL
AUDIO
OUT
ANTENNA
ANTENNA
75
o
1
EXT3 :
YPbPr
EXT3 :
AUDIO IN
R / L
SAT / STB
2
DIGITAL
AUDIO
IN
CABLE
4
5
3