Philips 42PF9641D/10 - Manual (Page 24)

Sleeptimer
This sets a time period after which the TV automatically
switches to standby.
1. Select Sleeptimer.
2. Press the cursor right.
3. Select a value with the cursor up/down.
> The list will have values from 0 to 180 minutes.When 0
is selected, the sleeptimer is switched off.
Childlock
With a 4-digit code, you are able to lock TV channels and
external sources to prevent children from watching certain
programmes.
1. Select Childlock.
2. Press the cursor right to enter the Childlock menu.
3. Enter your 4-digit code.
4. Select one of the menu items of the Childlock menu and
press the cursor right:
- Lock to lock all channels and externals:
- Custom lock to lock a certain programme or to lock all
the channels from a certain time.
< Select:
- Lock after to lock all programmes from a certain time
onwards.
< Press the cursor right twice.
< Select On to set the lock.
< Press the cursor left.
< Select Time and press the cursor right.
< Enter the time with the cursor up/down and right.
- Channel lock to lock a certain TV channel or external.
< Press the OK key to activate/deactivate.
- Parental rating to set an age rating to a digital
programme if the programme is parental rated.The
ratings applied are according the selected country in the
initial installation.
< Press the cursor right and select an age rating with the
cursor up/down.
- Select Unlock to disable all locks you have set.
Adjust feature menu settings (Continued) EN
24
Note: you can always switch off your TV earlier or select
another time set.
Info
TV menu Features
.............
Sleeptimer
Childlock
Set/Change code
On timer
Common interface
Demo
TV settings
Features
Installation
Note: you have to re-enter your code each time you
enter the Childlock menu.
Important: you have forgotten your code !
1. Select Change code and press the cursor right.
2. Enter the overriding code 8-8-8-8.
3. Enter a new personal 4-digit code.
4. Confirm your new entered code.
>
The previous code is erased and the new code is stored.