Panasonic CQ-DFX572N - Manual (Page 31)

31
CQ-DFX572N
28
E
N
G
L
I
S
H
Cautions:
¡We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands
and fingers.
1
2
3
4
Mounting Holes
w Mounting Bolt
Secure the rear of the unit.
After fixing Mounting Bolt w and Power
Connector e, fix the rear of the unit to the car
body by either method (a) or (b) shown on the
previous page.
Insert Trim Plate t.
After installation reconnect the nega-
tive (–) battery terminal.
First complete the electrical connections, and
then check them for correctness.(
a Page 34)
The included Mounting Collar q is designed
specially for this unit. Do not use it to attach
any other model.
Mounting Springs ( C )
e Power Connector
Engage the Mounting
Springs (
C ) in the mount-
ing holes of the Mounting
Collar q firmly.
Mounting Spring
Mounting
Hole
Insert Mounting Collar q into the
dashboard, and bend the mounting
tabs out with a screwdriver.
The tabs to be bent vary depending on
the car. To securely install the unit, fully
bend a number of the tabs so that there
is no rattling.
Example:
Tab
q Mounting
Collar