Printek PrintMaster 850 Series - Manual (Page 86)

DEC LA120/210 Emulation
80
Printer Controls
Bell BEL
Causes the printer's bell to sound.
Control code: BEL
Hexadecimal: 07
Select Automatic Carriage Return ESC [ 20 h
Selects automatic carriage return mode. This causes the printer to automatically perform a carriage return
(CR) for each line feed (LF), vertical tab (VT), or form feed (FF) that it receives. Overrides the “Auto CR”
value in the interface setup menu.
Escape Sequence: ESC [ 2 0 h
Hexadecimal: 1B 5B 32 30 68
Cancel Automatic Carriage Return ESC [ 20 l
Cancels automatic carriage return mode. Overrides the “Auto CR” value in the interface setup menu.
Escape Sequence: ESC [ 2 0 l
Hexadecimal: 1B 5B 32 30 6C
Printer Identification ESC [ c
(or) ESC [ 0 c
Causes the printer to respond with ESC [ ? 2 c to identify itself as an LA120-RA printer. (The response can
only be sent if serial I/O is selected.)