Printek PrintMaster 850 Series - Manual (Page 129)

Genicom 3840 and 3410 ANSI Emulation
123
Paper Path
Paper Path ESC [(p1)p
p1 selects
10 unload current path and load rear path
12 unload current path and load front path
14 unload current path and load middle path
If you send a command to change paper paths and the target path is the current path, then the printer
executes a form feed.
Example: Unload the current path and load the rear path:
Escape Sequence: ESC [ 1 0 p
Hexadecimal: 1B 5B 31 30 70