Printek PrintMaster 850 Series - Manual (Page 35)

ANSI X3.64 Emulation
29
Select International Character Set ESC R n
Selects the international character set as specified by the value of n in the following table. Overrides the
“Language” value in the forms menu.
n Character Set
0 United States of America
1 France
2 Germany
3 United Kingdom
4 Denmark
5 Sweden
6 Italy
7 Spain
8 Japan
The actual character substitutions are shown in the “International Character Mapping” table below. For this
to work correctly, an Epson FX font must be selected (see ESC k).
35 36 64 91 92 93 94 96 123 124 125 126
USA # $ @ [ \ ] ^ ` { ¦ } ˜
France # $ а ° з § ^ ` й щ и ¨
Germany # $ § Д Ц Ь ^ ` д ц ь Я
England £ $ @ [ \ ] ^ ` { ¦ } ˜
Denmark # $ @ Ж Ш Е ^ ` ж ш е ˜
Sweden # ¤ Й Д Ц Е Ь й д ц е ь
Italy # $ @ ° \ й ^ щ а т и м
Spain P
TS
$ @ ¡ С ¿ ^ ` ¨ с } ˜
Japan # $ @ [ ¥ ] ^ ` { ¦ } ˜
Example: The following escape sequence will select the German character set.
Escape Sequence: ESC R 2
Hexadecimal: 1B 52 02
Character Table ESC t n
Selects the Epson italic character set for n=0 or the Epson extended graphics character set for n=1. As
implemented, this selects either the Epson FX font or the PC USA font. The character attribute (fast draft,
draft, or letter quality) will not change.
Example: The following escape sequence will select the Epson FX font.
Escape Sequence: ESC t 0
Hexadecimal: 1B 74 30