Timer recording using s, Timer recording, Using s – Panasonic DMR-E30 User Manual
Page 27: Number to make timer recording, Press [showview] ([g-code]) (2) button, Press the numeric buttons (4) to enter the s, Number, Press [enter] (10)
27
Timer recording
Using S
HOW
V
IEW
* (G-
CODE
) number to make
timer recording
* S
HOW
V
IEW
: for Continental Europe.
G-
CODE
: for Australia, N.Z. and Asia.
G-
CODE
and S
HOW
V
IEW
are different trademarks used to
represent the same easy recording feature. However, for
simplicity, only the term S
HOW
V
IEW
will be used. If you use
G-
CODE
system, follow the same steps listed for the S
HOW
V
IEW
system.
[RAM] [DVD-R]
Remote control only
You can easily programme the unit to make a timer recording of a
programme by entering the programme’s S
HOW
V
IEW
(G-
CODE
)
number, which can be found in the television sections of
newspapers or in television guides. You can programme up to 16
programmes one month in advance. Programmes for everyday or
every week are counted as one programme.
Preparation
≥Switch [DVD, TV] (15) to “DVD”.
≥Ensure that this unit’s clock is set correctly.
≥Insert a disc for recording (make sure there is enough room for
the programme you are going to record plus a little extra).
1
Press [ShowView] ([G-Code])
(2) button.
HOW V IEW > CODE > 2 Press the numeric buttons (4) to enter the S HOW V IEW (G- CODE ) number. ≥If you enter the wrong digit, use [2] (10) to move back and enter the correct digit. 3 Press [ENTER] (10). ≥The Timer Programme Correction screen which allows you to confirm the programme appears and make corrections if ≥Check the programme. To make corrections (page 28). 4 If the programme is correct Press [ENTER] (10). ≥The Timer Programme List screen appears. 5 Press [RETURN] (23). ªTo put the unit on recording standby Press [ Á, TIMER] (12). Ensure “ Á” lights on the unit’s display. RETURN No. 0:59 SP ShowView Remain 12:53:00 16.7 TUE -- 0 9 RETURN No. 0:59 SP G-CODE Remain 12:53:00 16.7 TUE -- 0 9 Enter ShowView Number by using 0-9 key. Enter G-CODE Number by using 0-9 key. RETURN No. 0:59 SP ShowView Remain 12:53:00 16.7 TUE -- 0 9 1 1 1 1 1 1 1 1 RETURN No. 0:59 SP G-CODE Remain 12:53:00 16.7 TUE -- 0 9 1 1 1 1 1 1 1 1 1 1 RETURN CANCEL SELECT 2:00 1:00 16/ 7 TUE Mode Stop Start Name Date 1:58 SP TIMER RECORDING Remain 12:53:00 16.7 TUE ENTER SP RETURN SELECT 2:00 1:00 16/ 7 TUE Mode Stop Start Name Date 1:58 SP TIMER RECORDING Remain 12:53:00 16.7 TUE ENTER SP Press ENTER to store new programme. Press ENTER to store new programme. VPS PDC VPS PDC OFF OFF CANCEL 64 ABC 64 ABC RETURN SELECT SP OK 1:22 1:19 64 ABC 16/ 7 TUE 01 Mode Disc space Stop Start No. Name Date 1:58 SP TIMER RECORDING Remain 1:19:00 16.7 TUE ENTER New Timer Programme CANCEL OFF VPS PDC
necessary.
To programme other recordings, repeat steps 1, 2, and 3.