Precor C842i - Manual (Page 18)

Product Owner’s Manual: Club Features 16
Viewing the Error Log
ERROR LOG appears on the display followed by the first entry
in the error log if there are any errors. Up to ten error codes can
be retrieved.
If there are no errors in the log, you will see NO MORE
ERRORS displayed.
7. To view any additional error codes in the error log, use the arrow
keys. Each error code specifies when it occurred, listing the
odometer and hour meter values. Refer to Diagram 6.
Diagram 6: Error log
8. Copy the error code information to paper so you can provide it to
Customer Support if needed. Be sure to copy it exactly as
shown.
9. When you no longer need the information in the error log, press
QUICKSTART for at least four seconds to delete the error log.
Continue to maintain light pressure on the key until the message
CLEARED appears. When the key is released, 1 appears in the
Heart Rate display and dashes appear in the error code display,
which indicates the error log has been deleted.
Important: You cannot retrieve the error log once you have
deleted it. You may want to resolve any issues you are
experiencing with the cycle before clearing the error log.
10. When you are ready, press SELECT (C842i) or ENTER (C846i)
to move to the next display (serial number).
Heart Rate Above
Below
Weight Loss
Cardiovascular
SmartRate
1
12000 revs 17 HrS
Most recent
error
Error code
The hour meter at the time
the error was detected. Revolutions reading at
the time the error
occurred.