Philips DVD170AT - Manual (Page 8)

NOTE
- Unless indicated otherwise, all operations can be performed
using the remote control. Always point the remote control
directly at the player, making sure there are no objects
obstructing the path of the infrared beam.
- When there are corresponding keys on the front panel,
these can also be used.
1 Switch on the TV and select the video input for your DVD-
Video player.
2 To enjoy sound through your stereo system, turn on the sys-
tem and select the source input for the DVD-Video player,
or:
To enjoy DVD-Video with multichannel (surround) sound,
switch on the Home Theater system and select the source
input for your DVD-Video player.
3 On the front of the DVD-Video player, press ON/OFF. The
player display will light up, and the OSD invites you to
insert a disc.
4 When Autoplay is ON (the factory setting), any disc already
inserted in the player will start to play.
1 Press Open/Close on the front of the player. The disc tray
will open.
2 Put the disc you have selected into the tray, label side up.
Make sure it fits properly into the correct recess.
3 Gently push the tray, or press Open/Close, to close the tray.
- When Autoplay is ON (the factory setting), play starts.
- When Autoplay is OFF, the (play) screen for the type of
disc inserted will appear on the OSD, and information
about the disc’s contents and total playing time will appe-
ar on the display.
- To switch Autoplay off or on, see Settings (p. 22).
NOTE
- Because DVD movies are usually released at different times
in different parts of the world, all players have region codes,
and discs may have an optional region code. If you insert a
disc with a different region code into your player, you will
see the region code notice on the screen. The disc will not
play, and should be removed.
POWER ON/OFF
M P E G Multichannel
PAUSE
1 2 3 4 5 6 7
SHUFFLE TITLE
. . . . . .
DVD
OPEN/CLOSE
INSERTING A DISC
Insert disc
SWITCHING ON
OPERATION
english
14
GETTING STARTED