English, Before requesting service – Philips DVD170AT User Manual
Page 20
If the malfunction persists, you can run the player’s Diagnostic
Program.
INSTRUCTIONS:
1 Switch the player off.
2 Press down and hold both OPEN/CLOSE and
; and turn the
player on.
➜ ‘
BUSY
’ will appear on the display together with a coun-
ter. The counter indicates that the test has been comple-
ted when it reaches zero.
➜ After a few minutes, ‘
BUSY
’ changes to ‘
ERROR
’ or ‘
PASS
’.
3 Switch the player off to exit from the Diagnostic Program.
4 ‘
ERROR
’ indicates that your player needs repair. Contact your
dealer or the Philips Consumer Information Center (CIC).
5 ‘
PASS
’ indicates that the Diagnostic Program has found no
errors. In this case, the malfunction may be a result of
misinterpretation of the operating instructions, or could be
caused by an unsuitable disc or incorrect connections. If
you are unable to solve the problem, contact your dealer or
the Philips CIC.
6 You will find the phone number of the Philips CIC in your
Warranty Booklet.
DIAGNOSTIC PROGRAM
english
26
BEFORE REQUESTING SERVICE