Panasonic VB-44240A - Manual (Page 43)

Programming Your Handset
900 MHz Cordless Telephone User Guide 33
5. Press the "0" key to confirm your function
selection. The handset will display COMPLETE
next to the assigned key number and the
function assigned to that key.
You can now program the next F-key.
Note: To exit the programming mode at any
time, press the TALK key. This returns the
phone to Standby mode.
Note: You must press the TALK button on the
handset to scroll through System Speed Dial
(SSD) and Personal Speed Dial ( PSD)
addresses using the * and # keys.
The TALK button must also be pressed for the
programmed FF keys to function (except as
described in the following Note.)
Note: When Function Keys are programmed as
the MCO key, CO key, DN key, or BLF key, they
can be used without first pressing the TALK
button.
900 MHz UG.book Page 33 Wednesday, June 13, 2001 12:42 PM