Direct wall mounting – Panasonic VB-44240A User Manual
Page 27
Installing the 900 MHz Cordless Telephone
900 MHz Cordless Telephone User Guide
17
Direct Wall Mounting
If you do not have a standard wall plate, you can
mount the 900 MHz Cordless Telephone base
station directly on a wall. Before doing so, consider
the following:
•
Select a location away from electrical cables,
pipes, or other items behind the mounting
location that could cause a hazard when screws
are inserted into the wall.
•
Ensure that the wall material is capable of
supporting the weight of the base station.
•
Use #10 screws with anchoring devices suitable
for the wall material at the mounting point.
1. Insert two mounting screws in the
wall, 3-15/16
inches apart. Allow
about
3/16 of an inch between the
wall and screw heads for mounting
the base station.
2. Perform steps 1 to 3 of "Standard
3. Plug a telephone cord into the
LINE IN jack on the base station.
Connect the other end to the wall
jack leading to the Panasonic PBX.
4. Plug a telephone cord from a Panasonic key
telephone into the LINE OUT jack on the base
station.
900 MHz UG.book Page 17 Wednesday, June 13, 2001 12:42 PM