Panasonic VB-44240A - Manual (Page 36)

Using Your 900 MHz Cordless Telephone
26
Switching a call from key telephone to 900 MHz
handset
To switch a call from the key telephone to the 900
MHz handset during an active call:
1. Press HOLD on the key telephone.
2. Press the CORDLESS button on the base
station.
3. Press TALK on the 900 MHz handset.
Note:
• If you are on an active call on the key telephone
and you press the CORDLESS button on the
base station without first pressing the HOLD but-
ton on the key telephone, your call will be discon-
nected.
• If you are on an active call on the 900 MHz hand-
set and you press the desk button on the base sta-
tion without first pressing the HOLD button on the
key telephone, the transfer between phones is
delayed until the call is completed. (Avoid this
practice.)
• If the TALK button on the handset is pressed while
the base station is switching from Desk mode to
Cordless mode, the base station switches back to
Desk mode.
S ELECTING C HANNELS
To change the active channel, press the CHANNEL
button on the handset.
900 MHz UG.book Page 26 Wednesday, June 13, 2001 12:42 PM