Recording 05 – Pioneer DVR-530H-S User Manual
Page 40
Recording
05
40
En
5
Use the
/
to move the cursor to the
recording end time on the grid.
As you move the cursor around the grid, an arrow
stretches from the start time to the current cursor
position, representing the length of the recording. A
recording of up to six hours can be set.
6
Press ENTER to set the end time.
7
Select ‘Yes’ to set the timer recording and exit, or
‘No’ to go back to the timer recording screen.
• You can check the timer recording details you just set
from the main timer recording screen (see
Setting a
manual timer recording
on page 41).
Timer recording using the VCR Plus+™
programming system
This system makes programming timer recordings very
simple. Most TV guides publish PlusCode programming
numbers with their program details. If you want to make
a timer recording of a program, you just input the
corresponding code. The date, start, stop and channel
settings are made automatically. All you have to do is tell
the recorder the recording mode, and whether it’s a
once-only recording or a regular recording.
Note that if the country setting is incorrect (set in the
Setup Navigator), timer recordings made using the
PlusCode programming system may not work as
expected.
1
Press ‘VCR Plus+’ to display the VCR Plus+
program screen.
You can also access this screen from the Home Menu
(press
HOME MENU
, select
Timer Recording
, then
VCR Plus+
).
• Use the number buttons to enter the PlusCode
programming number. (To clear the last digit
entered, press
CLEAR
.)
• You can also use the
/ / /
buttons to select
digits from the on-screen display.
2
After making the settings, select ‘Enter’ and
press ENTER.
The timer recording screen appears with the timer
program you just set.
3
Confirm that the settings are correct.
If the channel number isn't displayed, use the
/
buttons to highlight
CH
, then use the
/
buttons to set
the correct channel number.
• If the channel number is set, but incorrectly, set up
the guide channel (see
VCR Plus+ CH Setting
on
page 93).
Easy Timer Recording
2ch
SAT
1/01
11:45
CHANNEL +/–
SP
REC MODE
11:00
12:00
13:00
14:00
15:00
16:00
17:00
– 13:45
1/01
2/01
3/01
HDD
HDD/DVD
Recording start time
Recording end time
HOME
MENU
HDD
DVD
CLEAR
ENTER
CLEAR
CH
REC MODE
ì
VCR Plus+
+
PlusCode#
1
3
4
5
6
7
8
9
0
Clear
Enter
Cancel
2
DVR530HS_RDR.book 40 ページ 2005年5月26日 木曜日 午後3時19分