Panasonic KX-PW12CL - Manual (Page 11)

Using E-mail
11
5
Registering with -ALPHA5
Make sure the -ALPHA5 indicator light is
green.
1. Fill in the “
”
application form. (See “ ” on page 9.)
2. Press (function), then press
(E-mail).
3. Press (start/copy).
● The display will show the telephone number
that has been registered at
-ALPHA5.
4. Press (start/copy).
5. Set the application form on the fax machine.
6. Press (start/copy).
7. 5 minutes later, a bell will ring and data
communication will automatically start.
● If you have another call during data
communication, hang up and wait for a
while.
8. After the data communication, a user
registration guide will be sent from the
E-mail server.
● Please write down the E-mail address and
security code sent from the server on the
back cover of the operating instructions so
as not to forget them.
2
1. Fill in the “ -ALPHA5, -FAX
” application form and fax it to 0077-
2322-9555. (See “ ” on page 9.)
2. Register your telephone number and tip
code as follows.
a. Press
(function), then press .
b. Enter your telephone number.
c. Press (register).
d. Enter your tip code.
e. Press (register).
f. Press (stop).
3. 1 minute later, the fax machine will
automatically dial to DDI.
• 2 or 3 weeks later, the
-ALPHA5
indicator will light up green.
1
6
Registering at
Information Service
1 2 3
4 5 6
7 8
0
9
7
Sending fax documents by
E-mail
1. Open the document tray and adjust the
document guides.
2. Insert the document FACE DOWN until a
single beep is heard and select the
resolution.
3. Press (E-mail).
4. Enter the required E-mail address.
● Refer to the character list on page 13.
5. Press (start/copy).
6. Enter the title (32 characters max.).
● Refer to the character list on page 13.
7. Press (start/copy).
Note:
● To send E-mail to an address stored in
memory (see “ ” on page 12), perform steps
1 to 3 above, then follow these steps:
4. Rotate until the name you want to
send to is displayed.
5. Press (start/copy).
8
Document tray
Adjust
the
guid
e
Document
guide(s)