Maintenance, Lights – Polaris 600 RUSH User Manual

Page 97

MAINTENANCE

Lights

When servicing a halogen lamp, avoid touching the lamp with bare fin-

gers. Oil from your skin leaves a residue, causing a hot spot that will

shorten the life of the lamp. If fingers do touch a lamp, clean it with

denatured alcohol.

Headlight Lamp Replacement

1. Peel back the foam shield covering the headlight assembly.
2. Remove the wire harness connector from the back of the headlight.
3. Grasp the bulb housing and turn it counter-clockwise to remove the

bulb.

4. Apply dielectric grease to the socket and install the new bulb.

Rotate the bulb 1/4 turn clockwise to secure it.

5. Reinstall the connector to the back of the headlight.
6. Secure the foam shield.

Taillight/Brake Light Replacement

The taillight assembly is not serviceable. If the light fails to operate

properly, replace the entire taillight assembly.

This manual is related to the following products:

IQ Shift 600 2014 600 Rush Pro-R 2014 800 Rush Pro-R 2013 600 Switchback 2013 600 Switchback Pro-R 2013 600 Switchback Adventure 2013 800 Switchback 2013 800 Switchback Pro-R 2013 800 Switchback Pro-R Adventure 2013 600 Rush 2013 600 Rush Pro-R 2013 800 Rush 2013 800 Rush Pro-R 2011 600 Rush 2011 800 Rush 2012 600 Rush 2012 600 Rush Pro-R 2012 800 Rush 2012 800 Rush Pro-R 2012 600 Switchback 2012 600 Switchback Pro-R 2012 600 Switchback Adventure 2012 800 Switchback 2012 800 Switchback Pro-R 2014 600 Switchback 2014 600 Switchback Pro-R 2014 600 Switchback Adventure 2014 800 Switchback 2014 800 Switchback Pro-R 2014 800 Switchback Pro-R Adventure 2014 600 Indy Voyager