Maintenance, Hood/side panel – Polaris 600 RUSH User Manual
Page 81
77
MAINTENANCE
Hood/Side Panel
The hood and side panels of the
snowmobile protect the operator
from moving parts. Never oper-
ate a snowmobile with the hood
or side panels open or removed.
Always ensure that the hood
and side panels are securely in
place before starting the engine.
To open a side panel, rotate the
two 1/4-turn fasteners at the
upper edges of the side panel.
Release the side panel strap at
the lower edge of the panel.
To remove an open side panel,
pull the panel outward to release
the tabs at the lower edge of the
panel.
Removing the hood is not recommended. Any service requiring the
removal of the hood should be performed by an authorized Polaris
dealer.
Strap
1/4-Turn Fasteners
This manual is related to the following products:
- IQ Shift 600 2014 600 Rush Pro-R 2014 800 Rush Pro-R 2013 600 Switchback 2013 600 Switchback Pro-R 2013 600 Switchback Adventure 2013 800 Switchback 2013 800 Switchback Pro-R 2013 800 Switchback Pro-R Adventure 2013 600 Rush 2013 600 Rush Pro-R 2013 800 Rush 2013 800 Rush Pro-R 2011 600 Rush 2011 800 Rush 2012 600 Rush 2012 600 Rush Pro-R 2012 800 Rush 2012 800 Rush Pro-R 2012 600 Switchback 2012 600 Switchback Pro-R 2012 600 Switchback Adventure 2012 800 Switchback 2012 800 Switchback Pro-R 2014 600 Switchback 2014 600 Switchback Pro-R 2014 600 Switchback Adventure 2014 800 Switchback 2014 800 Switchback Pro-R 2014 800 Switchback Pro-R Adventure 2014 600 Indy Voyager