Operation, Electronic reverse (perc t ) – Polaris 600 RUSH User Manual

Page 74

OPERATION

Electronic Reverse (PERCt)

Engaging Reverse

1. Stop the snowmobile and leave the engine idling.
2. Make sure the area behind your vehicle is clear.
3. Push the yellow reverse button on the left-hand control for one sec-

ond, then release. The engine will automatically reduce RPM and

start a reverse rotation. A flashing reverse light on the instrument

panel will indicate that the transmission is in reverse.

4. Apply the throttle slowly to make sure the transmission is in

reverse.The maximum engine RPM will be 6000 when in reverse.

TIP: If the engine stops running, the snowmobile will be in forward gear when it's

restarted.

Disengaging Reverse

1. Stop the snowmobile and leave the engine idling.

NOTICE: Engaging the starter when the engine is running WILL result in serious

engine damage, especially if the transmission is in reverse. Never

engage the starter when the engine is running.

2. Push the yellow reverse button for one second and release. The

engine will slow and begin to rotate forward. The light on the instru-

ment panel will shut off.

3. Apply the throttle slowly to make sure the transmission is in for-

ward.

This manual is related to the following products:

IQ Shift 600 2014 600 Rush Pro-R 2014 800 Rush Pro-R 2013 600 Switchback 2013 600 Switchback Pro-R 2013 600 Switchback Adventure 2013 800 Switchback 2013 800 Switchback Pro-R 2013 800 Switchback Pro-R Adventure 2013 600 Rush 2013 600 Rush Pro-R 2013 800 Rush 2013 800 Rush Pro-R 2011 600 Rush 2011 800 Rush 2012 600 Rush 2012 600 Rush Pro-R 2012 800 Rush 2012 800 Rush Pro-R 2012 600 Switchback 2012 600 Switchback Pro-R 2012 600 Switchback Adventure 2012 800 Switchback 2012 800 Switchback Pro-R 2014 600 Switchback 2014 600 Switchback Pro-R 2014 600 Switchback Adventure 2014 800 Switchback 2014 800 Switchback Pro-R 2014 800 Switchback Pro-R Adventure 2014 600 Indy Voyager