Philips CD285 - Manual (Page 29)

29 EN
Register the handsets
You can register additional handsets to the base
station. The base station can register up to 5
handsets.
1
Select [Menu] > [Services] > [Register],
then press [OK] to confirm.
2
Press and hold on the base station for
5 seconds until you hear a confirmation
beep.
3
Enter the system PIN. Press [Clear] to
make corrections.
4
Press [OK] to confirm the PIN.
Registration is completed in less than »
2 minutes. The base automatically
assigns a handset number to the
handset.
Note
If the PIN is incorrect or no base is found •
within a certain period, your handset displays
a notification message. Repeat the above
procedure if registration fails.
Note
The preset PIN is 0000. No change can be •
made on it.
Unregister the handsets
1
If two handsets share the same base
station, you can unregister a handset with
another handset.
2
Select [Menu] > [Services] >
[Unregister], then press [OK] to confirm.
3
Select the handset number to be
unregistered.
4
Press [OK] to confirm.
The handset is unregistered. »
Tip
The handset number displays beside the •
handset name in standby mode.
Restore default settings
You can reset your phone settings to the
original factory settings.
1
Select [Menu] > [Services] > [Reset],
then press [OK] to confirm.
The handset displays a confirmation »
request.
2
Press [OK] to confirm.
All settings are reset. »
Tip
For more information about the default •
settings, see the section on Default settings.
English