Connecting to video equipment, Installation, Projector – Philips cBright 2 Series User Manual
Page 12: 2) (4) (c) (f), Vcr projector, 2) (c) (e), 12 scart adapter (not for usa version) (3), Scart adapter (not for usa version) (3)
Connecting to video equipment
Note: The figures in brackets (1) correspond to the figures in the
accessories diagram.
The characters in brackets (a) correspond to the
characters in fig. 4 of ‘Controls and connections’.
Caution!
Always switch off the projector before making any connections.
PAL, NTSC, SECAM
1. Connect the Video out socket of a VCR, Laser Disc player,
video camera or TV to the Video socket
(e) of the projector.
For this, use the video/audio connection cable
(2) supplied.
2. Connect the Audio out L/R sockets of the VCR, Laser Disc
player, video camera or TV to the Video audio-in socket
(c) of
the projector.
For this, use audio/video connection cable
(2) supplied.
In case your VCR, Laser Disc player, video camera or TV is
equipped with a Scart connector (depending on region):
1. Connect the Scart/RCA Audio Video adapter (3) supplied to
the Scart connector of the VCR, Laser Disc player, video
camera or TV.
2. Plug the video/audio connection cable (2) supplied into both
the adapter and the Video
(e) and Video audio-in (c) sockets
of the projector.
S-VHS
1. Connect the S-Video out socket of a S-VHS video recorder,
Laser Disc player, video camera or TV to the S-Video socket
(f) of the projector.
For this use the S-Video connection cable
(4) supplied.
2. Connect the Audio out L/R sockets of the S-VHS video
recorder, Laser Disc player, video camera or TV to the Video
audio-in socket
(c) of the projector.
In case your VCR, Laser Disc player, video camera or TV is
equipped with a Scart connector (depending on region):
1. Connect the Scart/RCA Audio Video adapter (3) supplied to
the Scart connector of the VCR, Laser Disc player, video
camera or TV.
2. Plug the audio/video connection cable (2) supplied into both
the adapter and Video audio-in socket
(c) of the projector.
3. Plug the S-Video connection cable supplied into the VCR and
the S-Video socket
(f) of the projector.
R Audio L
out
S-Video
S-Video
R Audio L
out
VCR
Video
out
Video
out
Audio out
USB
Video
S-Video
Audio out
USB
Video
S-Video
Projector
Data out
D
Data out
D
video audio-in
Video audio-in
Data audio-in
Data audio-in
(2)
(4)
(c)
(f)
L Audio R
out
Video
out
L Audio R
out
Video
out
VCR
Projector
Audio out
USB
video audio-in
Video
S-Video
Data out
Data in
Audio out
USB
Video audio-in
Video
S-Video
Data out
Data in
Data audio-in
Data audio-in
(2)
(c)
(e)
7. Installation
12
Scart adapter
(not for USA
version)
(3)
S-Video
Scart adapter
(not for USA
version)
(3)
Connecting to video equipment