Panasonic BB-HCM371A - Manual (Page 54)

Operating Instructions
54
2.5 Encrypt the Camera Image in Transport Mode
The camera can encrypt the image using IPsec transport mode.
Note
If you use IPsec, refresh interval slows down.
1.
Click [IPsec] on the Setup page.
2. Click Camera in the Transport column.
• If you use transport mode in E-mail or FTP transfer, click No. in the Buffer/
Transfer column.
3. Enter each parameter in the data field.
The display shows that
the communication is in
HTTP and any people can
access the camera if they
have the pre-shared key
(see page 55).
Set up these settings to transfer images in transport mode (see page 111).