Polycom Instructor RP Version 1.0 - Manual (Page 8)

Setting Up the Polycom Instructor RP
2
Unpack and Position the System
Work with another person to unpack the Polycom Instructor RP system.
To perform this step, follow the instructions in
Unpacking the Rear Projection SMART Board
Interactive Whiteboard that is attached to the
outside of the crate.
Work with another person to roll the Polycom Instructor RP off the pallet and move it to the room where
you will be using it.
• Position the system so that it does not face
toward a window or other source of bright
light.
• Leave space in front of the system so that you
can open the doors.
• Leave space behind the system so that you
can work.
• Set up the system in an area with as little
dust, humidity, and smoke as possible.
• Lock the wheels when the system is in the
desired place.
1
Caution Be sure the wheels are unlocked
before you try to move the system.
Be careful when you move the
system. Quick stops, excessive
force, and movement over uneven
surfaces can overturn the system.
2