About this guide – Polycom Instructor RP Version 1.0 User Manual
Page 3
iii
About this Guide
Now that you’ve received your Polycom Instructor™ RP, you’ll probably
want to set it up and start enjoying its functionality as soon as possible. This
document, Setting Up the Polycom Instructor RP, explains how to unpack the
system, connect the equipment, calibrate it, and perform all the steps you need
to be ready to make calls and share data.
Because the Polycom Instructor RP contains components from a number of
different manufacturers, you may have to refer to other documents during the
set-up process. You can use this Setting Up the Polycom Instructor RP document
like a roadmap: it will tell you the steps you need to take and tell you where to
look for additional information, if necessary.
Most of the other documents that you’ll have to refer to are included with your
Polycom Instructor RP, either as printed documents or available through the
CDs that come with the system. These documents include:
• Polycom® Using the Polycom Instructor RP
• Polycom Setting Up the VSX™ 8000 System
• Polycom Administrator’s Guide for the VSX Series
• Polycom Getting Started Guide for the VSX Series
• Polycom Setting up the PowerCam™ Plus
• SMART™ Rear Projection SMART Board™ 3000i Installation Guide
• SMART Unpacking the Rear Projection SMART Board Interactive Whiteboard
• SMART SMART Board Software User’s Guide
• NEC® Quick Setup Guide
• NEC Portable Projector Important Information manual
• Sejin Electron Inc. User’s Manual for Windows® 95/98 Freeboard™
Many of the Polycom documents are also available at
For support or service, please contact your Polycom distributor or go to
Polycom Support