Polycom Instructor RP Version 1.0 - Manual (Page 12)

Setting Up the Polycom Instructor RP
6
Connect the Optional Equipment
Connect a document camera or another S-video device, such as an auxiliary PowerCam, to the Polycom
Instructor RP.
1. Place the document camera or other S-video
device wherever you want to locate it.
2. Find the S-video cable in the back of the
Polycom Instructor RP system. One end of
the cable is already connected to the system.
Connect the other end to your document
camera or other S-video device.
Connect a VCR or DVD player to the Polycom Instructor RP.
1. Place your VCR or DVD player on the shelf
in the Polycom Instructor RP cabinet.
2. Find the composite cable in the back of the
Polycom Instructor RP system. One end of
the cable is already connected to the system.
Connect the other end to your VCR or DVD
player.
3. Find the stereo audio cable in the back of the
Polycom Instructor RP system. One end of
the cable is already connected to the system.
Connect the other end to your VCR or DVD
player.
Connect an integrated computer to the Polycom Instructor RP system.
Once you connect the integrated computer, it
becomes part of the Polycom Instructor RP
system and should not be removed. This is the
computer onto which you will load the SMART
software and the Polycom Instructor Tools
software. You can then use it to annotate and
perform other SMART Board and video
conferencing functions.
Instead of an integrated computer, you can
connect a guest laptop to the Polycom Instructor
RP system. In contrast to the integrated
computer, the guest laptop can be attached and
removed from the system at any time. It does not
have the SMART or Polycom Instructor Tools
1
2
VCR/DVD
3 3