PACKARD BELL C3 - Manual (Page 9)

Packard Bell EasyNote C3 Disassembly Manual 9
Removing the Optical Disk Drive
To remove the ODD, first remove the battery (see Removing the Battery ) and remove the
keyboard (see Removing the Keyboard) then perform the following steps:
1. Remove the screws retaining the optical disk drive as shown in Fig. 9
Fig. 9 Releasing the optical disk drive
2. Flip over the unit, and push the ODD module out from the base unit as shown in
Fig. 10
Fig. 10 Pushing the optical drive out
M2.5x9 silver