PACKARD BELL C3 - Manual (Page 6)

Packard Bell EasyNote C3 Disassembly Manual 6
2. Unclip the memory module as shown in Fig. 3
Fig. 3 Removing the memory module
3. Remove the memory module from its slot and put it aside.
Removing the Hard Disk Drive
To remove the hard disk drive, first remove the battery (see Removing the Battery ), then
perform the following steps:
1. Unscrew the screws as shown in Fig. 4 to remove the HDD cover.
Fig. 4 Removing the hard disk drive cover
2. Release the screws that secure the HDD as shown in Fig. 5, and carefully pull out
the HDD assembly.
M3x6 silver