PACKARD BELL C3 - Manual (Page 13)

Packard Bell EasyNote C3 Disassembly Manual 13
Fig. 17 Removing the LCD Panel hinges
Removing the CPU
To remove the CPU first remove the battery (see Removing the Battery ) and remove the
Keyboard (see Removing the Keyboard ), then perform the following steps:
1. Remove the screws retaining the Heat Plate as shown in Fig. 18
Fig. 18 Removing the screws retaining Heat Plate
2. After taking out the heat plate, remove the CPU Fan screws, disconnect the CPU
Fan connector and remove the CPU Fan as shown in Fig. 19
Fig. 19 The CPU Fan
M2x3 copper
M2.5x7 silver
M2.5x7 silver