PACKARD BELL C3 - Manual (Page 19)

Packard Bell EasyNote C3 Disassembly Manual 19
4. Lift up the Main Board as shown in Fig. 29 and put it aside.
Fig. 29 Lifting up carefully the main board
Removing the MDC Modem
To remove the MDC Modem, first remove the Main Board (see Removing the Main Board )
then perform the following steps:
1. Disconnect the MDC cable and remove the two screws retaining the MDC modem
as shown in Fig. 30
Fig. 30 The MDC Modem
2. Lift up the MDC modem and put it aside.
M2x4 silver