Selecting/changing mute – Peavey PRO COMM U1002 User Manual

Page 20

Selecting/Changing MUTE:

Press the "MENU" button until the "VOL” function is selected. This will be

indicated by a block that will appear around the selected function located in

the upper right corner of the display.

Press the "GROUP"

▲ button or the "SCAN" ▼ button to place the

receiver in a "Mute" or "ON." Press the Menu button to save and escape.

CAUTION:

The AF meter and the Antenna “A,” “B" will not be functional with

the receiver muted. To determine if the receiver is in the "MUTE"

position, press the "MENU" button until the “VOL” function is

selected and it will be indicated by LCD display "MUTE" if muted

and "ON" if unmuted.