Set sleep mode, Set language, Reset to factory defaults – Pandigital PI1002DW User Manual

Page 46

Set Sleep Mode

The DPF will stay on until you power it off, however, to save power you
can set it to automatically go into a sleep mode when left idle for a
specific amount of time.

1. On

the

HOME

screen, press

MENU

to display the

Setup Menu

2. Select

Set Sleep Mode

, and then select the desired setting.

OFF (default) = Power saver is ‘disabled’; DPF will remain on until you power it off
or change the sleep mode setting
2/4/8 Hours = The DPF will automatically go into sleep mode when left idle the
specified amount of time

3. Select

Done

Set Language

Depending on model, this DPF may include multiple languages for the
user interface display.

1. On

the

HOME

screen, press

MENU

to display the

Setup Menu

2. Select

Set Language

, and then select the desired language.

Reset to Factory Defaults

If you have changed function settings, using this feature will restore
settings to the factory pre-set defaults.

1. On

the

HOME

screen, press

MENU

to display the

Setup Menu

2. Select

Reset to Factory Defaults

, and then select

Yes

to reset, or

to leave current settings.

3. Press

EXIT

to return to the

HOME

screen.