Panasonic TX-47P950A - Manual (Page 20)

20
Tuning Channels
Fine Tuning
Under normal reception conditions this function is not required or necessary.
However, in areas of poor reception or constant interference, a slight adjustment of the tuning may improve the picture and sound quality.
1
Press to select the FINE TUNE.
Press until the clear picture is received.
Press to store the FINE TUNE.
This stores the FINE TUNE to the selected Programme Number.
Press to exit from the FINE TUNE.
This returns the set to the normal viewing condition.
How to Cancel the Fine Tuning
Canceling previously adjusted (manually) fine tuning, means re-
activating the AFT (Automatic Fine Tuning). Re-activating the
Automatic Fine Tuning means allowing the set to automatically
tune to the optimum tuning position, for that programme Number.
2
3
1
Select the Programme Number
which you would like to return to
Automatic Fine Tuning (cancel the
manual fine tuning).
2
Press to display the MAIN
MENU,and then to the SETUP
menu.
Proceed to the TUNING MENU
(refer to page 15).
3 Press to select the MANUAL TUNE.
Press to access to MANUAL TUNE.
Press briefly to tune the best
position.
4
5
Press to store the AFT.
This stores the re-activated AFT.
Press to exit from the MANUAL
TUNE.
This returns the set to the normal
viewing condition.
Programme Number Skip
It is possible to skip Programme Number on which no TV stations are
tuned appearing on the screen. The function is only effective when
selecting Programme Numbers by pressing the Programme Number
Up or Down button either on the TV set or on the Remote control.
1
2
3
Under the normal viewing condition
press to select the Programme
Number you would like to skip.
Press to display the MAIN
MENU,and then to the SETUP
menu.
Proceed to the TUNING MENU
(refer to page 15).
Press to select the SKIP.
Press to change the mode to “ON”.
4
Press to store the Skip function.
Press to exit from the SKIP.
This returns the set to the normal
viewing condition.
TV/AV
TV/AV
TV/AV
5 1
3
2 4
Repeat Step1 to 4 for each
Programme Number for which the
Skip function is desired.
OK
MENU
MENU
SYS SELECT
TUNING MENU
AUTO TUNE
MANUAL TUNE
SOUND SYS
COLOUR SYS
AUSTRALIA
AUTO
SKIP OFF
5.5 MHz
FINE TUNE
SYS SELECT
TUNING MENU
AUTO TUNE
MANUAL TUNE
SOUND SYS
COLOUR SYS
AUSTRALIA
ACCESS
AUTO
FINE TUNE
SKIP
OFF
5.5 MHz
OK
SYS SELECT
TUNING MENU
AUTO TUNE
MANUAL TUNE
SOUND SYS
COLOUR SYS
AUSTRALIA
AUTO
FINE TUNE
SKIP ON
5.5 MHz
OK