Powerware 9170+ - Manual (Page 3)

EATON Powerware ® 9170 + Rail Kit (9− and 12−Slot Cabinets) Installation Guide
S
164201420 Rev C www.powerware.com 1
Rackmount Installation
To install a 9− or 12−slot uninterruptible power system (UPS) cabinet into
a rack, you must order a cabinet specifically designed for rackmounting.
Nine− and 12−slot battery cabinets are also available for rackmounting.
These models can be installed in an EIA−standard 48.3 cm (19")
equipment rack and include a rackmounting kit with the brackets and
required hardware.
Checking the Rail Kit Accessories
Verify that the following items are included inside each rail kit:
S
(2) front rails (left and right)
S
(2) rear rails (left and right)
S
(12) #6−32 0.75" screws
S
(12) #6 flat−head washers
S
(12) #6−32 Keps nuts
S
(4) adapter plates
S
(8) #10−32 0.5" pan−head screws
S
(8) #10 washers
S
9−Slot Cabinets:
− (12) metal clip nuts
− (4) rackmount ears
− (12) 1/4−20 1/2" Phillips−head bolts
S
12−Slot Cabinets:
− (18) metal clip nuts
− (6) rackmount ears
− (18) 1/4−20 1/2" Phillips−head bolts
Tools Required
To assemble the components, the following tools may be needed:
S
Medium flat−bladed screwdriver
S
Phillips
®
#2 screwdriver