Getting started, Spectralink 8002 wireless telephone overview – Polycom SpectraLink DCE201 User Manual
Page 9
1725-36027-001_C.doc
9
Getting Started
SpectraLink 8002 Wireless Telephone Overview
SpectraLink 8002 Wireless Telephones are mobile handsets for
workplace IP telephone systems. The handsets operate over an
802.11b wireless Ethernet LAN providing users a wireless voice over
IP (VoIP) extension. By seamlessly integrating into a SIP environment,
handset users are provided with high-quality mobile voice
communications throughout the workplace. The handset gives users
the freedom to roam throughout the workplace while providing the
features and functionality of a SIP desk phone.
The handsets reside on the wireless LAN with other wireless devices
using direct sequence spread spectrum (DSSS) radio technology. The
handset radio transmits and receives packets at up to 11 Mb/s.
In the SIP environment, the handsets support up to three proxy
servers, sometimes referred to as PBX’s. Each handset may have five
line appearances and two calls per line. Each handset may have
multiple sets of credentials to identify itself by current user.
The SpectraLink 8002 Wireless Telephone is a lightweight, durable
handset specifically designed for mobile workplace use within a
facility using SIP and an 802.11 wireless LAN. The handsets are to be
used on-premises; they are not cellular or satellite phones.
Install and charge the Battery Pack before using the SpectraLink
8002 Wireless Telephone. See Battery Packs and Chargers
sections below.
1